ADA INSTRUMENTS DigiTeo-10, Руководство по эксплуатации, Страница: 13 / 58

MEASUREMENT FOUNDATION
Digi Teo-2/5/10/20
13
5. Measuring a percent of grade (slope measurement)
Confirm in the angle mode
Operating Display
Press [V%], the dis-
play of vertical angle
changes to percent
grade.
Press [V%]. Percent
grade changes to angle
display.
Every time press V% , the displayed mode will change
alternately. When measured angle is exceeding ±100% to
horizontal position,“EEEEE.EEE”displays.
Output the data and serial communication (DigiTeo-2;5)
This instrument can record the data, you can record the angle
data and the distance data in the memory (500 data) or you can
output the data through COM. The data will include the time,
you should set it before you record or output it. (please see
“function setting ”)
1. RS-232 interface
DigiTeo-2 has the RS-232 interface joined. The instrument with the
computer or the PDA through the cable. It can transport the data of
the measure to the computer or the data collection equipment. It also
can transport the computer data to the DigiTeo-2. Remember the in-
terface is under the vertical knob.
2. Record the data
DigiTeo-2 in the different measuring mode, press [SFT], press [V%];
you can output the data from the instrument to the computer or the
PDA (select the cluster correspond), or you can record the data in the
memory of the instrument (select the memory of the instrument).
Mode Output (record)
Angle mode VA, HA
R
or HA
L
(vertical angle, horizontal
angle)
Distance mode VA, HA
R
or SD (vertical angle, horizontal
angle, slope distance)