12
4.4. Assembly order
Determining the right location for the rotisserie is extremely important for the proper
operation of the appliance, speed and convenience.
Before installation, check that all appliance parts are included and not damaged during
transport.
1. Place the appliance in a place that allows easy access from front side, on a hard and
non-flammable surface. The distance from non-flammable walls should be at least 10
cm (the distance between back of the appliance and wall should be at least 30 cm).
If the walls are not resistant to high temperatures, use appropriate insulation and keep a
minimum distance of 30 cm. Also keep a distance of at least 20 cm from other devices.
2. Level the appliance.
Warning!
Incorrect use of the appliance can cause oil to burn and fry, which can cause severe
burns, injury, as well as fires and equipment damage.
3. Before connecting the appliance to the gas installation, check on the rating plate to
which gas type the appliance is adapted and whether it corresponds to the type of gas in
the gas installation (propane-butane B / P or natural gas E).
4. Make the connection in accordance with the following rules:
• connection to natural gas should be made:
a) rigidly using seamless pipes (steel or copper);
b) or using a metal braided hose with a CE safety certificate;
• connection of B/P from a gas cylinder should be made with a flexible hose
with max. 1.5 m long, with CE safety certificate. The ends of the hose must be
secured with hose clamps.
5. A gas shut-off tap must be installed on each gas appliance and it should be easily
accessible.
6. After connecting the device to the gas installation, check for leaks using appropriate
sensors, paying particular attention to the connection points. The appliance must not be
put into operation after a leak has been detected.
Warning!
Never check the tightness of the gas system with a lit match or flame. This could cause
a fire or explosion and cause serious injury or material damage. The device must not
be put into operation after a leak has been detected.
