AD Power HPM-300A, Руководство пользователя, Страница: 11 / 26

- 11 -
1. Load wire connection method.(Refer to above picture)
* Red load wire: “A” terminal → Connect to the 15A terminal of HPM-300A.
* Black load wire: “±” terminal → Connect to the COM terminal of HPM-300A.
* Yellow load wire: “V” terminal → Connect to the V terminal of HPM-300A.
2. Press power on button.
3. Press mode button and select the AC mode.
4. When the preparations have been completed, connect the measurement load (device)
to the load wire’s plug socket and plug it into a power source.
5. When a power source is applied, the voltage, electric current, and electric power usage will
be simultaneously displayed
6. The voltage, electric current, and frequency will be displayed on the LCD.
7. Press to measure the energy(Wh) usage in the above situation. If is pressed,
the energy will be accumulated in the Wh mode.
8. When the accumulation pauses, press again and the accumulation will stop.
! Warning: To prevent electric shock, apply the power source to the load wire’s plug socket
only after connecting the terminal.
www.biall.com.pl