How To Disable A
Single Alarm
1.
From the top-left section, select
the Menu icon ( ).
2.
Select Alarms.
3.
Select Indoor
alarms on readings taken by
the display.
Select Outdoor
alarms on readings taken by
the outdoor device.
4.
Using the left and right arrows,
select the reading type of the
alarm to be disabled > select
Next.
5.
Select the alarm icon
until it displays OFF.
How To Disable
All Alarms
1.
Select Alarms.
2.
Select Indoor
alarms on readings taken by
the display.
Select Outdoor
alarms on readings taken by
the outdoor device.
3.
Using the left and right arrows,
select Turn All Alarms Off.
4.
Select Next. All alarms
are disabled.
5.
Select Save and exit.
When placement or an
environmental factor
may impact temperature,
humidity, or barometric
pressure readings, setting a
calibration adjustment can
improve accuracy.
Note: Calibration
adjustments are only
applied to readings
displayed on the indoor
display and stored on the
optional SD card. If your
outdoor device readings are
also sent to My AcuRite,
the calibration adjustments
set in the indoor display are
not sent to My AcuRite or
Weather Underground.
READING
CALIBRATIONS
How To Set A Reading
Calibration
1.
From the top-left section, select the
Menu icon ( ).
2.
Select Calibrate.
3.
Select Indoor to adjust readings
taken by the display.
Select Outdoor to adjust readings
taken by the outdoor device.
4.
Using the up and down arrows,
select the reading type to be
calibrated > select next.
5.
Using the up and down arrows, set
an adjustment.
6.
To save the calibration adjustment,
select done.
OFF
10
11
Indoor Display Sensors
Indoor : 32ºF to 122ºF; 0ºC to 50ºC
TEMPERATURE RANGE
Indoor : 1-100% RH
HUMIDITY RANGE
16 to 32.50 inHg
BAROMETRIC PRESSURE
