Page
4
of
11
3.
Remove the Exterior Protective Coatings
Carefully remove all of the exterior protective coatings. See S/B 96-009,
Removal of Protective Coatings During TQI.
Vehicle Interior
4.
Remove the Interior Protective Coverings
There are several protective coverings on the interior trim pieces and some areas of the carpet. Also, be sure to remove
the protective cover on the interface dial and the two paper tags on each of the front head restraints (one at the front
and one at the rear).
Carefully remove all items with clean hands to avoid soiling any surfaces. If any of the interior is dirty, clean it with mild
soap or an Acura cleaning product such as Leather & Vinyl Cleaner (P/N 08700-9214A) or Carpet Spot Remover (P/N
08700-9215A).
5.
Install the Floor Mats
Install the floor mats where they belong. Place the driver’s and front passenger’s floor mat eyelets over the anchors on
the floor, then turn the knobs
clockwise
to the lock position. Do the same for the rear seat floor mats.
The anchors for those mats are on the floor under the front seats.
