Lights
3. Remove the cover from the back
of the burned-out bulb by turning
it counterclockwise.
4. Remove the electrical connector
from the bulb by grasping it
between your thumb and fingers
and pushing downward while you
wiggle it slightly. Make sure you
pull on the connector, not the
wires.
5. Push the edge of the hold-down
spring and turn counterclockwise.
6. Insert the new bulb into the socket,
making sure all the tabs are in
place.
7. Reinstall the hold-down spring.
8. Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
9. Replace the bulb cover. Line up
the three tabs, push the cover in,
and turn it clockwise until it locks.
10. Reinstall the headlight motor fuse.
11. Turn on the headlights to test the
new bulb.
Maintenance
HOLD-DOWN SPRING
BULB
CONNECTOR
COVER
Содержание NSX 2000
