3. Place a cloth on the edge of the
keypad, and remove the upper half
by carefully prying on the edge
with a small flat-tip screwdriver.
4. Remove the old battery and note
the polarity. Make sure the
polarity of the new battery is the
same (
-
side facing up), then
insert it in the keypad.
An improperly disposed of battery
can hurt the environment.
Always confirm local regulations
for battery disposal.
5. Snap the two halves of the keypad,
then install the parts in reverse
order.
As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.
This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause
undesired operation of the device.
BATTERY
Remote Transmitter
138
08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu
2009 MDX
Table Of Contents
Main Menu
Содержание MDX 2009
Страница 324: ...320 08 06 06 16 58 07 09 ACURA MDX MMC North America Owner s M 50 31STX620 enu 2009 MDX Table Of Contents Main Menu ...
Страница 474: ...470 08 06 06 16 58 07 09 ACURA MDX MMC North America Owner s M 50 31STX620 enu 2009 MDX Main Menu Table Of Contents ...
Страница 487: ...08 06 06 16 58 07 09 ACURA MDX MMC North America Owner s M 50 31STX620 enu 2009 MDX Main Menu ...