92
Navigation System
System Setup
SETUP Mode
The SETUP function consists of two
main screens that allow you to change
and update information in the system.
To display the
SETUP
screen (
Main
Setup
), use the voice control system
and say “Setup” or press the
SET UP
button. To change it to the
SETUP
screen (
Other
), select the “Other” tab.
You can switch screens by selecting the
tab.
You can use the voice control system to
select any item on the
SETUP
screen.
NOTE:
• If some items appear to be grayed out
and cannot be selected, it is because
you did not select
OK
on the initial
Disclaimer
screen. See
System Start-
up
on page 17.
• Setup items in this manual with the
symbol indicate that the display
settings depend on what “Driver #”
was displayed on the MID when the
vehicle was started. See
Remote
Keyless Entry Setting
on page 18.
• If only “Welcome” is displayed, then
all Setup settings revert to factory
defaults, and all personal data (such
as Address Book or Calendar) are not
available.
• For information on the available
voice commands, see
Voice
Command Index
on page 166.
SETUP Screen (Main Setup)
From any screen, say “Setup screen” or
press the
SET UP
button, and the
following screen appears:
Brightness
The screen brightness has 11 settings.
To change the brightness, use the voice
control system and say “Brightness up”
or “Brightness down.” You can also
select
Brightness
and change the
setting by rotating the
Interface Dial
knob
.
Tip:
If you are having trouble viewing the
screen in bright lighting conditions, try
increasing the brightness.
