Navigation System
107
System Setup
Say or select
Edit Area
to create the
area to be avoided. The following screen
appears:
Either select
Address
or
Map Input
on the
Enter avoid area by
screen.
Each choice provides a slightly different
way to locate the approximate map
display for drawing the area you wish to
avoid.
After selecting the choice, a
map
screen
will be displayed.
Rotate the
Interface Dial knob
to
select the map scale (available scales are
1/20, 1/8, and 1/4 mile scales). Use the
Interface Dial
to move the crosshairs
(red circle) to the desired start point and
push in on the
Interface Dial
to “set”
the start point. Then move the
Interface Dial
in a straight or diagonal
direction to encompass the area to be
avoided.
NOTE:
The maximum size of the “Avoid area”
is 1/4 of the navigation display screen
regardless of the map scale setting.
The selected area will be displayed as a
shaded box with a yellow border. Push
in on the
Interface Dial
to set the end
point of the avoided area.
To “redraw” the area, select
CANCEL
and repeat the area selection process.
