Your vehicle’s on board diagnostic
system will detect a loose or missing
fuel fill cap as an evaporative system
leak. The first time a leak is detected
a ‘‘TIGHTEN FUEL CAP’’ message
appears on the multi-information
display.
Screw the fuel fill cap back on
until it clicks at least once. If you
do not properly tighten the cap,
you will see a ‘‘TIGHTEN FUEL
CAP’’ message on the multi-
information display. If the system
still detects an evaporative system
leak after retightening the cap, the
malfunction indicator lamp may
come on (see page
).
Push the fuel fill door closed until
it latches.
Remove the fuel fill cap slowly.
You may hear a hissing sound as
pressure inside the tank escapes.
The fuel fill cap is attached to the
fuel filler with a tether. Place the
cap in the holder on the fuel fill
door.
5.
6.
4.
471
Service Station Procedures
Tighten Fuel Cap Message
358
HOLDER
FUEL FILL CAP
TETHER
08/02/06 21:23:16 31TL1600 0363