Acura 2007 Acura RDX, Руководство пользователя

Страница: 373 / 442

← ←
←
CONTINUED
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade. Install the new blade onto the
blade assembly:
Find two tabs with a ‘‘SET’’ and
‘‘
’’ mark on the wiper blade
assembly. This is the direction you
install.
Slide the blade onto the assembly
until it is locked by the tabs.
Remove the blade from the blade
assembly:
Pull out the blade by grabbing
the end of the blade as shown
above illustration.
Find two tabs with a ‘‘SET’’ and
‘‘
’’ mark on the wiper blade
assembly. The opposite side of
the ‘‘
’’ mark is the direction
you pull out the wiper blade.
5. 3. 4.
Wiper Blades
Ma
int
e
na
nce
369
REINFORCEMENT
BLADE
BLADE
TABS
０６／０５／１９ １５：０６：０２ ３１ＳＴＫ６００ ０３７４