CONTINUED
Your Acura’s roof panel has a single
release handle on each side, making
it easy to remove and install. When
not in use, the roof panel can be
stored in a special holder under the
rear window.
Always clean and dry the roof panel
before you remove it so dirt and
water do not fall in the interior and
engine compartment.
Do not put any items other than the
roof panel in the roof holder or you
can damage the roof holder.
One person should be able to remove
and install the roof panel. Although
the panel is not heavy, you may find
it awkward to handle because of its
size. If so, get someone to assist you
so you do not damage the panel.
Open both windows.
Turn off the engine and set the
parking brake.
Release each side of the roof by
pushing the lock tab sideways and
pulling down the release lever.
Open the door. Locate the rear
window release handle on the rear
of the driver’s door opening, next
to the seat. Pivot this handle
towards the driver’s seat. The rear
window will pop up slightly.
1.
2.
3.
4.
Removing and Storing
Removable Roof Panel
Instruments and Controls
65
