Spark Plugs
10 m m
CAP NUTS
10 mm
BOLTS
COVER
Replace the spark plugs one side at a
time. Make sure the front cylinder
ignition coils and the back side of the
cover are marked "FR" and the rear
cylinder ignition coils and the back
side of the cover are marked "RR".
To replace them:
1. Remove the cover over the spark
plugs by removing the four 10 mm
bolts and the two 10 mm cap nuts.
IGNITION COIL
10 mm
BOLT
2. Disconnect the three ignition coils
from the wire harness by squeez-
ing the harness end of each con-
nector and pulling.
CONTINUED
Maintenance
Replacement
Содержание 1997 NSX
