© 2016 American Honda Motor Co., Inc. – All Rights Reserved.
BII03788-09 (1605)
13 of 14
44. Cut off the clip from the vehicle harness.
QCN0804BB
FOG LIGHT
SUBHARNESS
2-PIN CONNECTOR
FRONT
BUMPER
Do not
fasten yet.
FOG LIGHT
HARNESS
2-PIN
CONNECTOR
Do not
fasten yet.
VEHICLE
HARNESS
CLIP
(Cut off.)
AMBIENT
TEMPERATURE
SENSOR
FOG LIGHT
HARNESS
WIRE TIE
FRONT BUMPER
(inside)
VEHICLE
HARNESS
45. With the help of an assistant, bring the front bumper
close to the vehicle. Plug the vehicle 2-pin connector
into the ambient temperature sensor, and secure the
vehicle harness to the fog light harness with one wire
tie.
46. Plug the fog light subharness 2-pin connector into
the fog light harness 2-pin connector.
47. Install the front bumper.
48. Make sure that all wire harnesses are routed
properly and all connectors are plugged in.
49. Install all other removed parts.
50. Connect the negative cable to the battery.
51. Press and hold the radio power button for two
seconds to restore the radio and navi (if equipped)
system functions.
52. Without navigation: set the clock.
53. If necessary restore the systems back to normal
operation as described in the Service Information.
Check the Operation of the Fog Lights
54. Turn the headlight switch to the AUTO or “
”
position (headlights on low beam).
55. Turn on the fog light switch (indicator is on).
56. If the fog lights do not turn on, check the fuse and all
the connectors, including the ground cable.
QBN2108AH
FOG
LIGHT
SWITCH
HEADLIGHT SWITCH
Low High
OFF
OFF
-
ON
-
-
-
-
-
-
NOTE: The fog light lenses may cloud when the outside
temperature is cold; this is normal and should go away in
warm weather.
