8 of 18
BII12560-03 (1907)
© 2019 American Honda Motor Co., Inc. – All Rights Reserved.
25. Carefully remove the insulator from the driver’s front
door sill trim. Do not damage the insulator.
26. Line up the edge of the insulator with the rib on the
left front illuminated door sill trim.
QD22708AH
INSULATOR
DRIVER’S FRONT
DOOR SILL TRIM
(Do not reuse.)
QD22709AH
INSULATOR
Align with the rib.
INSULATOR
SECTION VIEW
LEFT FRONT
ILLUMINATED
DOOR SILL
TRIM
LEFT FRONT
ILLUMINATED
DOOR SILL TRIM
27. Using isopropyl alcohol on a shop towel, thoroughly
clean the left front illuminated door sill trim where the
aluminum tape will attach.
28. Using scissors, cut one aluminum tape into four
equal pieces. Secure the insulator to the left front
illuminated door sill trim with two pieces of aluminum
tape.
29. Carefully remove the insulator from the left rear door
sill trim. Do not damage the insulator.
QD22710AH
Clean with
isopropyl
alcohol.
ALUMINUM TAPE
(Cut into 4 pieces.)
1/4
ALUMINUM
TAPE
1/4
ALUMINUM
TAPE
INSULATOR
LEFT FRONT
ILLUMINATED
DOOR SILL
TRIM
Clean with
isopropyl alcohol.
INSULATOR
LEFT REAR DOOR
SILL TRIM
(Do not reuse.)
