© 2004 American Honda Motor Co., Inc. - All Rights Reserved.
BII 28356 (0411)
7 of 7
19. While pushing down on the coin pocket or ashtray
holder, install the player into the dash opening and
onto the studs of the upper player brackets. Install
one 6 mm flange nut on the end of each stud.
Tighten the flange nuts securely.
2N02082S
PLAYER
6 mm FLANGE
NUTS (4)
LEFT PLAYER
BRACKET
STUD
STUD
RIGHT PLAYER
BRACKET
Push down on
the lid of the
coin pocket
holder.
2N02091S
SQUARE
HOLE
HOOK
CLIP
PLAYER
PANEL
LATCH
20. Insert two player panel hooks into the square
holes of the right and left player brackets, then
insert two player panel clips into the latches.
21. Remove the masking tape.
22. Reconnect the negative cable to the battery.
23. Enter the anti-theft codes for the radio and the
navigation system (if equipped).
24. Enter the customer’s radio station presets, and
set the clock.
25. Check the operation of the player according to the
player Owner’s Manual supplied.
26. Reinstall all removed parts.
27. Give the Owner’s Manual for the player to your
customer.
