© 2004 American Honda Motor Co., Inc. - All Rights Reserved.
BII 28356 (0411)
5 of 7
11. Remove the two nuts from the premium sound
system amp.
2N02030S
NUT
(reused)
LOWER PLAYER
BRACKET
STUD
PREMIUM
SOUND
SYSTEM AMP
12. Attach the lower bracket to the studs of the amp,
and reinstall the two nuts. Tighten the nuts
securely.
13. Using scissors, cut one cushion tape in half.
Attach the cut cushion tapes to the player in the
areas shown.
3108010S
PLAYER
50 mm
50 mm
CUSHION TAPE
(Cut in half.)
2N21112S
ILLUMINATION
BULB
HARNESS
ILLUMINATION
BULB (Remove.)
VEHICLE
HARNESS
WIRE TIE
ELECTRICAL TAPE
2N02052S
5 x 8 mm
WASHER-BOLTS (4)
(included with player kit)
RIGHT
PLAYER
BRACKET
LEFT
PLAYER
BRACKET
LATCH
PLAYER
LATCH
14. Install one latch to each of the right and left player
brackets.
15. Position the player on the right and left player
brackets, and install the four 5 x 8 mm
washer-bolts included with the player kit.
16. Remove the illumination bulb, then wrap the
connector using electrical tape. Loop any excess
illumination bulb harness, and secure it to the
vehicle harness with one wire tie.
