© 2003 American Honda Motor Co., Inc - All Rights Reserved.
BII 26193 (0309)
3 of 4
9.
Stack the radio on top of the cassette player, and
slide them into the center panel bracket. Install
the radio with the four bolts removed in step 7,
and install the cassette player with four 5 x 8 mm
washer-screws supplied.
12. Reinstall the hazard switch using the two self-
tapping screws you removed in step 6.
10. Slightly bend the harness clip, and attach it to the
rear of the cassette player with one 5 x 8 mm
washer-screw supplied.
CENTER PANEL
BRACKET
BOLT
(reused)
RADIO
CASSETTE
PLAYER
5 x 8 mm
WASHER-SCREWS
(supplied)
Use the center holes.
CENTER PANEL
SELF-
TAPPING
SCREW
(reused)
HAZARD SWITCH
BOLT
(reused)
11. Loop the BUS cable, and attach it to the harness
clip. Plug the connector of the BUS cable into the
rear of the radio.
5 x 8 mm
WASHER-SCREW
(supplied)
RADIO
CASSETTE PLAYER
CASSETTE PLAYER
BUS CABLE
HARNESS
CLIP
5 x 8 mm
WASHER-
SCREWS
(supplied)
CONNECTOR
