2 of 5
BII08562-30 (1803)
© 2018 American Honda Motor Co., Inc. – All Rights Reserved.
TOOLS AND SUPPLIES REQUIRED
Isopropyl alcohol
Shop towel
INSTALLATION
NOTE:
• Be careful not to scratch the interior trim when installing
the spare tire kit.
• Install the correct size tire.
• Give all the removed parts to your client.
1.
Using isopropyl alcohol on a shop towel, clean the
spare tire rim in the area shown.
2.
Remove the adhesive backing from the caution
label, and attach the caution label to the spare tire
rim in the area shown.
3.
Using a tire changer, install the spare tire (sold
separately) onto the spare tire rim according to the
operation manual instructions. Inflate the spare tire
to 60 psi (420 kPa).
Client Information: The information in this
installation instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
“do-it-yourselfers.”
CAUTION LABEL
VALVE
STEM
HOLE
SPARE TIRE RIM
Clean this area with
isopropyl alcohol.
Installing the Spare Tire Kit
4.
Remove the trunk floor cover and set it aside; it will
not be reused.
5.
Remove the rear panel lining and set it aside; it will
not be reused.
TRUNK FLOOR COVER
Do not reuse.
REAR PANEL LINING
Set aside.
CLIPS (6)
