HD IP Video Decoder AiP-D
6
Manual
33
1.4-6 Alarm time
Set the period of time 1-100 seconds. The alarm output relay is triggered upon an alarm event
1.4-7 SMTP setup
HD IP Video Decoder AiP-D
6
is capable of sending JPEG snapshots to an email account when
an alarm event is triggered. To enable this feature, you must type in the email account
information.
1.4-8 FTP setup
HD IP Video Decoder AiP-D
6
is capable of alarm snapshot to an FTP server. To enable this
feature, you must type in the relevant FTP account information.
1.5 Network setup
In order to connect HD IP Video Decoder AiP-D
6
to LAN or the Internet you require the
following information. Subnet mask, gateway and IP address. Consult your system administrator
for above information.
It is highly recommended that the HD IP Video Decoder AiP-D
6
is accessed on a high
bandwidth network such as Gigabit LAN.
1.5-1 IP mode
Set the HD IP Video Decoder AiP-D
6
to Static, DHCP, and PPPoE IP modes. It is highly
recommended that the HD IP Video Decoder AiP-D
6
is accessed on a high bandwidth network
such as Gigabit LAN’s.
1.5-2 IP address
Enter the IP address for the HD IP Video Decoder AiP-D4 using the virtual keyboard
