HD IP Video Decoder AiP-D
6
Manual
32
1.4-2 Alarm input type
The HD IP Video Decoder AiP-D
6
alarm inputs can be configured as normal open (N/O), normal
close (N/C), or AiP camera where the alarm signal from an AiP camera activates the alarm.
1.4-3 Motion enable
‘Motion Enable’ enables motion alarm recording, after the motion detection area (‘Motion Area
Setup’) has been set. Press Left or Right at Motion Enable to change the setting.
1.4-4 Motion sensitivity
There are eight levels of sensitivity adjustable for motion alarm triggering, ranging from ‘Highest’
to ‘Lowest’. Press Left or Right to change the sensitivity setting.
1.4-5 Motion area setup
There are a number of ways to set the motion detection area. The detailed setting sequence is
described as follows:
Keyboard
Remote controller
Mouse
Step 1
Enter Motion Area Set menu item.
Step 2
Press Up, Down, Left, or Right to move cursor
Move mouse for starting position
Step 3
Press Enter to define starting area
Step 4
Press Enter again to finish a motion detection zone
Mouse-drag for an area
Step 5
To clear motion zones press Menu button
Double-click for clear motion zones
Step 6
Press ESC for exit the setting menu
Move mouse to “X” icon and press
Left-mouse click to exit motion zone
setting
Red indicates motion area
