Acumen Ai-D3 series, Руководство пользователя

Страница: 19 / 105

19
3.5.4 Alarm output
Please check current channel status: “○” means it is not in alarming status, “●” means it is
in alarming status.
You can use desktop shortcut menu or click [main menu]> [alarm function]> [alarm output]
to enter the alarm output interface.
Picture 3.9 alarm output
【
Configuration
】
Alarm is on according to the configuration.
【
Manual
】
Click the all button and the according channel is alarming no matter the channel in
any state.
【
Stop
】
Click the stop button and the according channel stops alarming no matter the channel
in any state.
3.5.5 PTZ control
PTZ control is a little different between hybrid mode & full digital mode:
Digital channel
– the digital channel need link PTZ, the remote device should connect with
PTZ and with protocol correctly set also.
Analog channel
– Only when the device is connect with PTZ and configure protocol
correctly is ok.
Operation interface is as followed. The functions include: PTZ direction control, step, zoom,
focus, iris, setup operation, patrol between spots, trail patrol, boundary scan, assistant switch, light
switch, level rotation and so on.
Note: 1. Decoder A (B) line connects with DVR A(B)line. The connection is right.
2. Click [main menu] >[system configuration] >[PTZ setup] to set the PTZ parameters.
3. The PTZ functions are decided by the PTZ protocols.