Acuity AccuRange AR500, Руководство пользователя

Страница: 31 / 52

AR500 User’s Manual
LLL00xxxx – Rev 1.0 24
If the selected parameters correspond to the parameters of the sensor
interface, the program will identify the sensor, read and display its
configuration parameters:
If connection a connection cannot be
established, a prompt will appear asking
to make an automatic search for the
sensor.
To start search, press the Yes button and a
configuration window will appear Where: it will
be necessary to set the search range for the
baud rate and the network addresses. When set,
press the
Search button.
The program will perform automatic search of
the sensor by searching over possible rates,
network addresses and COM-ports of PC.
9.3 Sensor Operation
Once the sensor is successfully identified, check its operability by placing a
target in the path of the laser and within the sensor’s working range. Press
the Request button to obtain a single measurement on the Current Result
indicator at the top of the screen.
Note: The pressing of the
Request button executes 06h request