Acuity Controls GR2400 Скачать руководство пользователя страница 35

Страница: 35 / 103

Page 29

ON TIME: 09:00:00am

OFF TIME: 05:00:00pm

ACTIVE DAYS:

Mon

Sat,Sun

SAVE

Time to the nearest Second

This schedule allows for setting ON and OFF times to the

nearest second. This is not allowed in the other menus.

Seconds must be enabled in the DISPLAY OPTIONS

menu. (Path:USER MENU/SETUP/ SYSTEM

SETUP/SYSTEM OPTIONS/DISPLAY OPTIONS)

After Midnight

Programs with turn OFF times after midnight are automati-

cally handled by the clock.

For example a restaurant is open until 10 pm

on Sunday through Thursday but on Friday

and Saturday nights it is open until 4 am.

Since an OFF time of 4am Saturday night is actually 4am

Sunday does this require a separate schedule for Sunday?

On most clocks Sunday would then have an OFF time at 4

am and also at 10pm? The answer is no. The clock takes

care of it. Just program Friday and Saturday as ON at say

4pm and OFF at 4 am. The clock will consider the 4 am

OFF time as an extension of the previous day.

ON TIME: 04:00:00pm

OFF TIME: 4:00:00am

ACTIVE DAYS:

FRI

EVERYDAY

SAVE

Note that this ON time is on Friday

While the Off time is on Saturday

ON TIME: 04:00:00pm

OFF TIME: 4:00:00am

ACTIVE DAYS:

SAT

EVERYDAY

SAVE

Note that this ON time is on Saturday

While the Off time is on Sunday

Some very tricky schedules can be done with this

but please make sure you think through the overlap-

ping days so that a schedule is programmed for that

day.

Содержание GR2400








































































































Результаты поиска

Содержание GR2400

Отзывы:

Acuity Controls GR2400, Инструкция по эксплуатации, программированию и техническому обслуживанию, Страница: 35 / 103

Результаты поиска

Содержание GR2400

Отзывы: