WARNING:
Please read the “important safety instructions” prior to installation of this product. The mounting instructions can be found inside the
mounting kits or downloaded from
www.marklighting.com
INSTALLATION INSTRUCTIONS
These installation instructions are used for installing the following luminaires and kits:
Luminaire
Fixture Type
RUBIK 9CS, RUBIK 5CC, RUBIK 3CL
Recessed - Planar Grid Solution
A) LED Important Safety Instructions………………………………………………………………………………………..……Page 1
B) Identification of Recessed Rubik Luminaire...................................................................................................................Page 2
C) Overview of Rubik Installation........................................................................................................................................Page 2
D) E10W and EMG Instructions……………………………………………………………………………………………………Page 3
E) Typical nLight Network Layout………………………………………………………………………………………………….Page 4
F) Ceiling Trim……………………………………………………………………………………………………………………….Page 5
One Lithonia Way, Conyers, Georgia 30012
•
Phone: 888-834-5684
•
www.marklighting.com
2.
Bend the built in T-Bar clips to secure the fixture to the T-Bar ceiling, or use hanger wire hole (see Figure 1). Optionally secure
T-Bar clips to the T-Bar ceiling with fasteners (not provided)
**Caution:
MAKE SURE LUMINAIRE IS MOUNTED TO A SECURE STRUCTURE. USE APPROPRIATE MOUNTING
HARDWARE TO INSTALL FIXTURE RATED FOR YOUR APPLICATION. FAILURE TO MOUNT FIXTURE CORRECTLY COULD
RESULT IN SERIOUS INJURY.
Installation Instructions
ABOVE CEILING ACCESS REQUIRED
KEEP THESE INSTALLATION INSTRUCTIONS
1. Place the fixture in the appropriate T-Bar ceiling structure.
BEND OUT HOOK TO
ENGAGE T-BAR WITH
ALL T-BAR CLIPS
HANGER WIRE
ATTACHEMENT
POINT (secure to
appropriate structure
for weight)
Part Number 2400471 – Rev. A
1
OPTIONALLY SCREW
INTO T-GRID
Rubik Installation Instructions
©2016 Acuity Brands Lighting, Inc. All Rights Reserved.
We reserve the right to change design, materials and finish in any way that will not alter installed
appearance or reduce function and performance.
www.AcuityBrands.com/CustomerResources/Terms_and_Conditions.aspx
Figure 1.
