ACU-RITE Atomic Clock Скачать руководство пользователя страница 4

3

4

• Replace battery annually or when the clock cannot receive the 

atomic signal.

• Keep clock clean, dry and dust-free by cleaning it regularly with 

a soft cloth.

• Do not use corrosive cleaners or chemicals on the clock.

• Always store the clock without a battery when not in use.

Mount the Clock

• Utilize the hanger molded into the backside of the clock for wall 

mounting.  

• Use a securely anchored screw, nail or hook to support the 

weight of the clock.  

• Ensure the mounting screw/nail head is large enough to secure 

the clock and it from slipping off in the event that it is bumped.

Outdoor Use

This only applies to clocks that are labeled for outdoor use.

• Extended periods of cold temperatures (below -4ºF / -20ºC) can 

cause alkaline batteries to function improperly. Use lithium 

batteries in low temperatures to ensure continuous operation of 

the clock. 

• To extend the life of the clock, place in an area protected from 

direct weather elements.

TROUBLESHOOTING

Problem

Possible Solution(s)

Poor Signal

• Place clock near a window with the 

curtains or blinds open to improve signal 

reception.

• Place clock more than 3 ft away from 

electronics or wiring to minimize 

interference. Electronics (computers, 

TVʼs, fluorescent lights, microwaves, etc.) 

can interfere with signal reception. 

• If you do not find good reception on 

your first attempt, try again later. 

Reception may be impacted by the 

weather, season, time of day and solar 

activity. The best reception is typically at 

night just before/after sunrise and sunset. 

In areas and times of very poor 

reception, it may take a few days before 

the signal can be received. 

• On rare occasions the atomic signal 

WWVB transmitter is turned off for repair 

or maintenance.

Clock will

not synchronize

• Insert a new 1.5 volt “AA” battery 
• Take the clock outside on a clear night 

and remove the battery. Power it up by 

reinserting the battery, which will force it 

to search for the atomic signal again. If 

the clock works outside but not inside, 

you may have an indoor interference 

problem.

CARE

Содержание Atomic Clock






Отзывы: