background image

OPERATION 

Using the Thermometer 

Pull the trigger of the Infrared Thermometer to measure the surface 

temperature of an area. 

Field of Measurement 

The Infrared Thermometer measures average surface temperature on the basis 

of distance to spot diameter (D:S) ratio. This ratio is the size of the area being 

measured by the thermometer as it relates to distance. The targeted area being 

measured becomes larger as the distance from the thermometer increases. The 

smaller the target, the closer the thermometer should be to it. 
The D:S ratio for the Infrared Thermometer is 12:1, illustrated below. 

Examples:

 If you're standing 12-feet (3.6 m) away from the target surface, the 

area being measured will be 1-foot (0.3 m) in diameter. If your target surface is 

1-inch (25 mm) in diameter, the thermometer must be within 12-inches (300 mm) 

of the target. 

12-Inch 

(300mm) 

24-Inch 

(600mm) 

36-Inch 

(900mm) 

12-Feet 

(3.6m) 

Spot 

Size 

Distance 

1-In 

(25mm) 

2-In 

(50mm) 

3-In 

(75mm) 

1-Ft 

(300mm) 

Emissivity 

Emissivity is the measurement of an object's ability to radiate heat. Emissivity 

values range from 0 (shiny mirror) to 1.0 (blackbody). Most organic materials 

and painted or oxidized surfaces have an emissivity close to 0.95. This 

thermometer is preset (non-adjustable) to an emissivity value of 0.95. Refer to 

the chart for a list of emissivity values for common surfaces. 

Содержание 02084









Отзывы: