Display Features
Introduction
The Acurite
®
Weather Forecaster with wireless outdoor sensor collects
outside weather data and sends it wirelessly to the Display Console via a
low-power radio frequency. This weather forecaster has been designed
to be easy to install and use.
The sleek display console houses a liquid crystal display (LCD) which will
calculate and display all the weather data received from the wireless
sensor outside. The display console features a pressure sensor for
measuring barometric pressure and a temperature sensor for measuring
indoor temperature. The Display Console is powered with three “AA”
alkaline batteries (not included).
The wireless outdoor sensor is completely wireless and contains a sensor
for measuring outdoor temperature. The wireless outdoor sensor is
powered with two “AA” alkaline or lithium batteries (not included).
Please read through this manual to learn more about the Acurite
®
Weather Forecaster. Keep this manual for future reference.
Parts List
model #02010
1. Display console
2. Wireless outdoor sensor
Overview
Log on to
www.chaneyinstrument.com
To receive product updates
and information,
PRODUCT REGISTRATION
Product Registration
SUPPORT
1
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY
AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove
battteries from equipment which is not to be used for an extended perid of time. Follow the polarity (+/-) diagram in the battery
compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same
or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as
batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use
rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.