background image

DISPLAY UNIT FRONT 

1.  Average Wind Speed 

Based on all wind speed readings 
from the past 2 minutes. 

2.  Current Wind Speed 

3.  Backlight Button

For momentary backlight and 
dimmer settings. 

4.  Peak Wind Speed 

Highest speed from past 60 minutes. 

5.  Current Indoor Temperature

Arrow icon indicates the direction the 
temperature is trending. 

6.  Current Indoor Humidity

Arrow icon indicates the direction 
the humidity is trending. 

7.  Barometric Pressure 

Arrow icon indicates the direction 
the pressure is trending. 

8.  Humidity Level Indicator

Indicates a high, low or ideal indoor 
humidity level. 

9.  Display Low Battery Indicator 

10. Date 

11. Intelli-Time

®

 Clock 

Automatically updates itself for 
Daylight Saving Time. 

12. AUTO DIM Indicator 

Indicates display backlight “AUTO 
DIM” mode activated. 

13. Moon Phase 

14. Sensor Low Battery Indicator 

15. Seasonal Information 

Wind chill will show when temperatures 
are below 40

o

F (4

o

C), Dew Point when 

temperature is 41-79

o

F (5-26

o

C), and 

Heat Index when temperature is over 
80

o

F (27

o

C). 

16. Learning Mode Icon

Disappears after weather forecast 
self-calibration is complete. 

17.  12 to 24 Hour Weather Forecast 

Self-Calibrating Forecasting pulls data 
from your sensor to generate your 
personal forecast. 

18. Current Outdoor Humidity

Arrow icon indicates the direction 
the humidity is trending. 

19. Outdoor Sensor Signal Strength 

20. Current Outdoor Temperature

Arrow icon indicates the direction the 
temperature is trending. 

DISPLAY UNIT BACK 

21. Integrated Hang Hole 

for easy wall mounting. 

22. A-B-C Switch 

ID code that must match sensor’s A-B-C 
switch to ensure units synchronize. 

23. Plug-in for Power Adapter 

24. Reset Button 

Full reset to factory defaults. 

25. Power Adapter 

26. Intelli-Time

®

 Battery Compartment 

27. Battery Compartment 

28.

 Button 

for setup preferences. 

29.

 Button 

for setup preferences. 

30.

 Button 

for setup preferences. 

31.

 Button 

Press to access all-time high and 
low records. 

32. Battery Compartment Cover 

(not shown) 

Содержание 01607BPDI





















Отзывы: