14
LOCATE AWAY FROM SPRINKLER HEADS
DO NOT install the sensor where it will be sprayed by a sprinkler system. This
may force water inside the sensor.
LOCATE AWAY FROM WIND & RAIN OBSTRUCTIONS
DO NOT mount the sensor with obstructions around it.
Consider a location that is a wide open area, with few
structures around to ensure accurate wind measurement.
View Video
Visit us online to view installation photos and
video, or learn more about AcuRite technology:
www.AcuRite.com/5in1
False Detection
This sensor features advanced technology to distinguish between lightning
strikes and interference, however in rare cases the sensor may "false detect"
lightning activity due to interference. In these situations, verify there is no
lightning in the area and then relocate the sensor. If the false detections persist,
identify and relocate the source of interference or relocate the sensor.
Interference
The sensor features enhanced interference rejection capabilities to prevent
false lightning detection. When the detector cannot detect lightning due to
interference from nearby equipment, the sensor's interference indicator will flash.
• Electric motors (windshield wiper motor or fan motors in cars, hard drive and
optical drive motors on your PC and AV equipment, well pumps, sump pumps)
• CRT monitors (PC monitors, TV's)
• Fluorescent light fixtures (turned off or on)
• Microwave ovens (while in use)
• PC's and mobile phones
WARNING:
Take shelter IMMEDIATELY when lightning is present, whether or
not it has been detected by the Lightning Detector. If you are concerned about
lightning strikes, follow all safety precautions to keep yourself and others safe.
DO NOT rely on this Lightning Detector as your only source for warnings
about potentially deadly lightning strikes or other severe weather conditions.
Lightning Sensor Installation Guidelines
