ActronAir Serene 2 RC-02 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 16

ActronAir Serene 2 RC-02 Скачать руководство пользователя страница 11

Operation Manual - Serene 2 Remote Controller

Document: 9590-4010

Ver. 1 200819

Operation Manual

Remote Controller

11

06. How To Use Advanced Function

06.01. Swing Function

Setting vertical angle of airflow

While the unit is on, use the

button to set the direction (vertical angle) of airflow.

1. Press the

button to activate the louvre. The vertical louvre will swing up and down automatically.

2. Press it again to stop the automatic function.

NOTE

Continue pressing

the

button will adjust the vertical airflow angle in five different position. Keep pressing the button

until the direction you prefer is reached.

Setting horizontal angle of airflow

While the unit is on, use the

button to set the direction (horizontal angle) of airflow.

1. Press and hold the

button for more than 2 seconds to activate the louvre. The vertical louvre will swing left

and right automatically.

2. Press and hold it again to stop the automatic function

NOTES

When using COOL and DRY mode, do not set vertical louvre to the minimum angle for long periods of time. This can
cause water to condense on the louvre blade, which may drop on your floor or furnishings. See Fig. 1

When using COOL or HEAT mode, setting the vertical louvre to the minimum angle can reduce the performance of the
unit due to the restricted air flow.

Do not move the louvre by hand. This will cause the louvre to become out of sync. If this occurs, reset mains power
supply isolator of the air conditioning to restart the unit. This will reset the louvre.

During Pre-Heat function louver will be in a default position.

Range

Fig. 1

06.02. LED Display

1. Press the

LED

button to activate or de-activate the display on the indoor unit.

2. Press and hold the

LED

button for more than 5 seconds until it beeps, release. Then press and hold again for 5

seconds then release after beeps.

3. After few seconds the room temperature shows.
4. To revert to previous display, repeat steps 2 and 3. To revert the change press

LED

button until set point shows

on the indoor unit.

«
...
9
10
11
12
13
...
»

Содержание Serene 2 RC-02

















Отзывы:

Нет отзывов