ActronAir MultiElite 2 MRC-075CS-3, Руководство пользователя

Страница: 10 / 20

Owner's Manual - MultiElite 2 Split System
Doc. No. 9590-4012 Ver. 2 220616
Owner's Manual
Multi Split System
10
07. Manual Operations
Operation Mode Selection
While two or more indoor units are simultaneously operating, make sure the modes do not conflict with each other. The
heat mode claims precedence over all other modes. If the unit initially started to operate in
HEAT mode, the other units
can operate in HEAT mode only.
Example: If the unit initially started to operate under COOL (or FAN ) mode, the other units can operate under any mode
except HEAT .
If one of the unit selects HEAT mode, the other operating units will stop operation and displays -- .
Alternatively, the defrost and alarm indication light (if applicable) will light up, or the operation indication light will flash
rapidly, and the timer indication light will turn off ( for the floor and standing type).
Optimal Operation
To achieve optimal performance, please note the following:
• Adjust the direction of the air flow so that it is not blowing directly on people.
• Adjust the temperature to achieve the highest possible level of comfort. Do not adjust the unit to excessive
temperature levels.
•
Close doors and windows in
COOL
mode or
HEAT
mode.
• Use the TIMER ON button on the remote controller to select a time you want to start your air conditioner.
• Do not place any object near the air inlet or air outlet, as the efficiency of the air conditioner may be reduced and the
air conditioner may stop running.
• Clean the air filter periodically, otherwise cooling or heating per conformance may be reduced.
•
Do not operate unit with horizontal Louvre in closed position.
08. Care and Maintenance
NOTES
Apart from filter cleaning, all other general maintenance and care of systems should be undertaken by a licensed technician.
Service, maintenance, repairs and decommissioning of this unit must be performed by a licensed HVAC technician; qualified
to handle R-32 refrigerant.
Maintenance Procedures
This section describes the procedures that must be performed as a part of normal maintenance program. Regular
servicing of equipment by licensed technician is highly recommended. Regular servicing of your unit helps in maintaining
its optimum performance and reliability.
The checklist and service periods provided on this manual are guides only,
as some sites may require more frequent servicing.
Always disconnect electrical power to the unit before performing
these procedures. It is always a safe practice to observe all safety warnings and cautions when conducting maintenance
tasks.
WARNING
Hazardous Voltage !
Always make sure that all power supply, including remote controls, are disconnected before performing maintenance.
Observe proper LOCK-OUT/TAG-OUT procedures to ensure that power cannot be inadvertently energised. Failure to
disconnect power before maintenance procedures can result in serious injury and/or death.
This unit is charged with R-32 mildly flammable refrigerant.