ActronAir LM-ZC, Руководство по эксплуатации

Страница: 4 / 16

4
TURNING ZONE CONTROLLER ON
Notes
* Zone Controller temperature setting can only be adjusted 2 •
0
C below or above
the Master Controller set point temperature. This is a factory set limit, which is
recommended in order to maintain system accuracy and maximize effi ciency. Should
this require changing, contact ActronAir Technical support on freecall number :
1800 119 229
Master Controller shown above is LM7-D, same procedure applies with LM24W model. •
1
Turn the system ON by pressing the button on Master
Controller LM7-D or LM24W.
2 To turn the zone ON, press the button on Zone
Controller. Alternatively, press the designated zone on the
Master Wall Controller.
Zone Controller display will show the SET TEMPERATURE, ZONE and ESP AUTO.
3
Set the desired temperature by pressing either the
SET TEMP UP / or DOWN / arrow key. *
For warmer room temperature, press the UP arrow key. •
For cooler room temperature, press the DOWN arrow key. •
ON
OFF
MODE
ON/OFF
Master Wall Controller
FAN
AUTO
HEAT / COOL
AUTO
HEAT / COOL
LOW COOL
ON
OFF
PROGRAM
EXIT
SELECT
SET TEMP SET TEMP
TIMER
REPEAT / REPEAT /
RUMPUS FAMILY
BEDROOM 1 BEDROOM 1
KITCHEN DINING
MASTER BED MASTER BED BEDROOM 2 BEDROOM 2 BEDROOM 3 BEDROOM 3
2
1
3
3
ROOM
TEMP
MODE
ON/OFF
SET
ZONE COOL HEAT
ESP
OFF AUTO
C
TEMP
Z O N E C O N T R O L
MAX
Zone Controller
3
3
2