Using the Tool
3-9
F
Press
BACK
key on Scan Tool to return
to Main Menu.
3.6 Tool Setup/Test
The
Tool
Setup/Test
functions allow
the user to adjust the display’s
contrast and perform self-tests.
3.6.1
Changing
Display
Contrast
The contrast is displayed as a percent value ranging from 100% to
5% and can be changed by 5% intervals .
In the
Tool
Setup/Test
menu, the
first function is
Adjust
Contrast
.
Press the
ENTER
key and then use
the
▲
or
▼
keys to increase or
decrease the contrast. Holding
down the
▲
or
▼
keys changes the contrast in that direction in 5%
steps. When done, press the
ENTER
key to return to the
Tool
Setup/Test
menu.
Contrast settings are not saved after the tool is turned OFF. Contrast
is reset to the manufacturers setting when powered-up.
To
quickly
change
the
contrast
after
powering
the
AutoScanner,
press
the
▼
key
four
(4)
times
and
then
the
ENTER
key
twice.
READ
ERASE
NO
BACK
ENTER
YES
Main Menu
5)Tool Setup/Test
\
\]
Change
90% ENTER When
Done
!
