573102 | REV. A | 07.2015
Bosch Automotive Service Solutions Inc.
CP9680
AutoScanner® Plus
| User guide |
17
|
en
tool can be powered from vehicle or PC using USB to
use the
Review Data
function.
1. Select
Review Data
.
•
Use the
UP
and
DOWN
keys until
Review
Data
is highlighted.
•
Press
.
Main Menu
Vehicle Diagnostics
Acronyms
Review Data
Print Data
Code Lookup
System Setup
If Review Data is selected from the Main Menu, a Select
Vehicle menu is shown. This menu contains up to 5
previous vehicles, so select which vehicle you wish to
review data.
Select Vehicle
Prev: 06 Accord
Prev: 04 Express 1500
2. Follow prompts and instructions provided by scan
tool and then select item whose data you wish to
review.
•
The
Review Data
menu shows a checkmark next
to the item(s) that has data.
•
If there is not a checkmark next to the item, then
this item can’t be selected until the appropriate
function is run from the
Diagnostic Menu
.
•
See “Recording” on page 17 for detailed
instructions on this function.
Review Data
✓I/M Monitors
✓DTCs (Codes)
✓State OBD Check
✓Recording
View Freeze Data
✓O2 Monitor Tests
✓Diagnostic Monitor Tests
Vehicle Information
Modules Present
Recording
The
Recording
function is used to play back a recording.
This function is very similar to
View Data
. The only differ-
ence is that
View Data
is real-time viewing of PIDs, while
Recording
is a viewing of previously recorded PIDs.
From the
Review Data
menu:
1. Select
Recording
.
•
Use the
UP
and
DOWN
keys until
Record-
ing
is highlighted.
•
The tool can keep up to 5 recordings per vehi-
cle. If the tool has more than one recording,
select a recording to playback.
•
Press
.
Review Data
✓I/M Monitors
✓DTCs (Codes)
State OBD Check
✓Recording
View Freeze Data
O2 Monitor Tests
Diagnostic Monitor Tests
Vehicle Information
Modules Present
2. Select
Playback Recording
.
•
Use the
UP
and
DOWN
keys until
Play-
back Recording
is highlighted.
•
Press
.
Playback Options
Playback Recording
Long PID Names
English/Metric
•
The recording has frame number and timestamp
(in seconds).
–
Negative frames and timestamps indicate
data recorded before trigger event.
–
Positive frames and timestamps indicate
data recorded after trigger event.
–
Use the
UP
and
DOWN
keys to view
recorded PID data within each frame.
–
Use the
LEFT
and
RIGHT
keys to scroll
back and forth through frames.
–
See Appendix A for PID Definitions.
