activTek A1019A Скачать руководство пользователя страница 6

Страница: 6 / 8

Route power wires to the power
connection terminals; connect
the black wire to the S1 and the
white wire to the S2 .

10. Dress all wires and replace cover.

Your ActivTek Mini-Split unit requires no periodic maintenance beyond normal replacement of the
ActivePure® cell.

Note: For optimal performance, we recommend the replacement of the ActivePure® cell every year,
even if the UV lamp appears to be operating normally.

MAINTENANCE

Содержание A1019A

Страница 1: ...CAUTION READ MANUAL CAREFULLY FOR PROPER PROCEDURES AND OPERATION ELECTRONIC AIR PURIFICATION SYSTEM Mini Split Unit with ActivePure Certified Space Technology Installation Manual 65 00563_VA 00710_0815 ...

Страница 3: ...ATION STEPS NOTE Unit requires continuous power We strongly recommend that it is NOT installed where power to the unit will be cycled on and off WARNING ThisunitmustbeinstalledbyalicensedHVACcontractor Failuretodosowillvoidwarranty oftheproduct 1 Remove film from one side of Velcro 2 pieces and attach to the ActivePure cell as shown 2 Remove film from opposite side of Velcro ...

Страница 5: ...llast using same method as above 7 Mount ballast in suitable location 8 Connect wiring assemblies to ballast assembly using like colored wires as a guide ie red to red etc RedWires BlueWires RedWires RedWires BlueWires BlueWires ...

Страница 6: ...e to the S2 10 Dress all wires and replace cover Your ActivTek Mini Split unit requires no periodic maintenance beyond normal replacement of the ActivePure cell Note For optimal performance we recommend the replacement of the ActivePure cell every year even if the UV lamp appears to be operating normally MAINTENANCE ...