2
7
Safety Precautions
• Please read and understand all safety precautions and user instructions prior to use. Call ActiveAid at
1-800-533-5330 or 507-644-2951 with questions or concerns.
• The
Shower/Commode chair
is designed to accommodate most individuals up to
350 lbs. (158kg).
• The expected service life of a
922
product is 3 years under normal use conditions.
Note: this may vary based on
frequency of use.
• ActiveAid products are specifically designed to be used with ActiveAid accessories and options. Unless
otherwise noted, accessories and options from other manufacturers have not been tested by ActiveAid and are
not recommended for use with ActiveAid products.
• Product modifications made without express written consent (including but not limited to, modification through
the use of unauthorized parts or attachments) are not recommended and will void the product warranty.
• This equipment is designed to accommodate a range of users; therefore, the unit has various adjustment slots
and holes. Avoid placing fingers or other body parts in any of these areas.
• Please dispose of packaging materials properly. Keep plastic bags away from children.
• ActiveAid shower/commode chairs are designed for indoor use only.
• Do not submerge the shower/commode chair.
• Extreme movements laterally or front to back may cause the unit to tip. These movements will cause a change
to the normal center of gravity of the chair.
• When transferring or re-positioning in the chair, ensure casters are properly aligned (front casters in forward
position, rear casters positioned to the rear) and wheel locks/caster locks are locked (as applicable to the
configuration of the selected product).
• Do not use foot plates in the transfer process or when shifting your weight.
• Wheel locks/caster locks are intended to keep the shower/commode chair stationary during transfer or use.
They are not intended to be used as brakes to slow and stop a moving shower/commode chair.
• Do not remove the anti-tip levers, they provide rearward stability.
• Do not exceed the recommended tire pressure (on the sidewall of the tire) for Pneumatic Wheels.
•
Caution: Check all fasteners before operating.
•
Caution: It is necessary to periodically check all fasteners (snap buttons, screws, nuts, bolts, clips, pull pins,
handles, etc.) to ensure they are secure.
13. If swing-away adjustable laterals were ordered,
remove the bolts from the lateral assembly.
14. Place lateral clamp and lateral assembly onto the back
frame above the armrest assembly. Place clamp bracket
into place and hand start each bolt.
15. Tighten bolts securely.
Repeat steps for other side, if ordered.
