manualshive.com logo in svg

ActiveAid 922, Руководство пользователя, Страница: 14 / 15

Поделиться
Скачать
ActiveAid 922 Скачать руководство пользователя страница 14

Maintenance

• It is necessary to inspect your Shower/Commode chair at least weekly to ensure it is in safe operating condition.

• Check all fasteners (snap buttons, screws, nuts, bolts, clips, pull pins, handles, etc.) to ensure they are present 

  and secure.

• Check upholstery for tears and cracks.  

• Check belts for fraying, cuts, tears, broken/worn stitching and buckles for cracks or damage.

• Check wheels, casters, and tires for flat spots, cracks, and wear.  

• Check wheel locks or caster locks for tightness and proper function.

• Wheel locks may need to be adjusted as tire tread wears.

• Wheel lock fasteners may need to be tightened.

• Ensure hand rims are properly secured to wheels.

• Replace damaged or worn components. Contact your Supplier for repair/replacement of said parts before 

  continuing use of the shower/commode chair.

• Use only recommended ActiveAid replacement parts; use of any other parts may void your warranty and cause 

  damage to your device.  

• After each shower use, rinse the device with water to remove soap residue. Using a soft non-abrasive cloth or 

  sponge, wipe the device down to remove water accumulation and product build up. Allow to dry completely 

  before storing.

• When cleaning the unit, use a mild detergent with a soft non-abrasive cloth or sponge. Do not use harsh 

  cleaning solvents or an abrasive cleaning agent.

• Upholstery pads may be cleaned with a non-abrasive, non-alcohol-based soap or sanitized using a bleach 

  dilution of up to 1:10. Note, many anti-bacterial and disinfectant products contain alcohol and should not be 

  used on the upholstery, due to the drying effect of the alcohol. Choose a non-alcohol-based sanitizer. 

  Germicidal wipes that are rated to kill C-difficile spores may be used on the upholstery and the epoxy coated 

  stainless steel.

• Urethane Coated Fabrics may be cleaned with a sponge or damp cloth to wipe the surface clean with warm 

  water. As needed, they may be hand washed using warm water and a mild detergent. Do not use bleach. Line 

  dry. Do not iron. Do not dry clean.

Cleaning/Disinfecting

When asking your supplier to order replacement parts, please specify the serial number of the 922 unit.  

Your Supplier will contact ActiveAid Customer Service to obtain the necessary items for your specific unit. 

If you have any questions, please contact your local supplier or call ActiveAid, LLC at 1-800-533-5330 or 

1-507-644-2951.

Parts Replacement

11

Содержание 922
















Отзывы:

Нет отзывов