User Manual of Network Camera
75
Figure 7-5
Recording Schedule Interface
2. Check the checkbox of
Enable Record Schedule
to enable scheduled recording.
3. Set the record parameters of the camera.
Figure 7-6
Record Parameters
Pre-record: The time you set to start recording before the scheduled time or
the event. For example, if an alarm triggers recording at 10:00, and the
pre-record time is set as 5 seconds, the camera starts to record at 9:59:55.
The Pre-record time can be configured as No Pre-record, 5 s, 10 s, 15 s, 20 s,
25 s, 30 s or not limited.
Post-record: The time you set to stop recording after the scheduled time or
the event. For example, if an alarm triggered recording ends at 11:00, and the
post-record time is set as 5 seconds, the camera records until 11:00:05.
The Post-record time can be configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min
or 10 min.
Note:
The record parameter configurations vary depending on the camera model.
4. Click
to edit the record schedule.
Содержание ACC-V110N
Страница 1: ...Network Camera User Manual V5 0...
