User Manual of Network Camera
26
1.
Check the checkbox of
to enable WPS.
2.
Choose the connection mode as PBC.
Note:
Support of this mode is mandatory for both the Access Points and the
connecting devices.
3.
Check on the Wi-Fi router to see if there is a WPS button. If yes push the
button and you can see the indicator near the button start flashing, which
means the WPS function of the router is enabled. For detailed operation,
please see the user guide of the router.
4. Push the WPS button to enable the function on the camera.
If there is not a WPS button on the camera, you can also click the virtual button to
enable the PBC function on the web interface.
Click
button.
When the PBC mode is both enabled in the router and the camera, the camera and
the wireless network is connected automatically.
PIN Mode:
The PIN mode requires a Personal Identification Number (PIN) to be read from either
a sticker or the display on the new wireless device. This PIN must then be entered to
connect the network, usually the Access Point of the network.
Steps:
1.
Choose a wireless connection on the list and the SSID is shown.
Содержание ACC-V110N
Страница 1: ...Network Camera User Manual V5 0...
