mVault I
Quick Start Guide
10
mVault I Quick Start Guide 2012 - v1.0
Communications Regulation Information
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio-frequency energy, and if not installed and used in accordance with Active Storage’s
instructions, may cause harmful interference with radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be required to correct the
interference at his or her own expense. Important changes or modifications to this product not authorized by
Active Storage, Inc., could void the EMC compliance and negate your authority to operate the product.
Important Safety Information
To ensure your own safety, and the safety of your Active Storage mVault system, always follow the
precautions below:
The only way to disconnect power completely from the system is to remove the two power cords. Make sure
at least one end of each power cord is within easy reach so that you can unplug the mVault. For your own
safety and that of your mVault system, always take the following precautions.
Disconnect the power cords (by pulling the plug, not the cord) if any of the following conditions exists:
• the power cord or plug becomes frayed or otherwise damaged
• your mVault system is exposed to rain or any other excess moisture
• your system has been dropped or the enclosure has otherwise been damaged
• you want to clean the enclosure (call Active Storage for instructions before using any cleaning products
on the enclosure)
• you spill something into the enclosure
Be sure that you always do the following:
• Protect your system from dampness or wet weather, such as rain, snow, etc.
• Keep your system away from any exposure to liquid from a washbasins, bathtubs, shower etc.
• Follow all instructions and warnings when working with your system
All electrical equipment may be hazardous if misused. Operation of this product, or similar products, must
always be supervised by trained personnel. Do not allow children access to the inside of any electrical
product and do not permit them to handle any cables. This system is certified as a component for use only
with equipment for which the suitability of the combination has been determined by a Nationally Recognized
Testing Laboratory.
High-Risk Safety Warning
This system is not intended for use in the operation of nuclear facilities, aircraft navigation or
communications systems, or air traffic control systems, or for any other use where the failure of the system
could lead to death, personal injury or severe environmental damage.
