QUICK START GUIDE
HARRIER HDMI CAMERA INTERFACE BOARD
Version 1.5.1.s May 2021
Page 7 of 7
Reset Button
Pressing this button on the Harrier Evaluation Board causes the camera interface board and camera
to reset. Some features require a camera reset to activate/complete certain VISCA commands (e.g.
change of video mode).
Note: this button only works if the 4-way cable is connected between the Harrier Evaluation Board
(J102) and the camera interface board (J2).
Technical Support
In case of any issues, please contact Active Silicon Technical Support on the telephone numbers
below or by email to
Europe & APAC:
Active Silicon Ltd
Pinewood Mews, Bond Close, Iver,
Bucks, SL0 0NA, UK.
Tel:
+44 (0)1753 650600
Fax:
+44 (0)1753 651661
Website:
Americas:
Active Silicon, Inc.
479 Jumpers Hole Road, Suite 301,
Severna Park, MD 21146, USA.
Tel:
+1 410-696-7642
Fax:
+1 410-696-7643
Email:
Website:
4-May-2021, ASL
