QUICK START GUIDE
HARRIER HDMI CAMERA INTERFACE BOARD
Version 1.5.1.s May 2021
Page 1 of 7
QUICK START GUIDE
HARRIER HDMI
CAMERA INTERFACE BOARD
Introduction
This guide is designed to get you quickly up and running with the
Harrier HDMI Camera Interface Board
(AS-CIB-HDMI-001-A) and the Harrier USB/HDMI Evaluation
Kit (AS-CIB-USBHDMI-001-EVAL-A). The interface board can be purchased with a Sony FCB-
EV7520A camera as a pre-assembled unit, shown in Figure 1 (AS-CIB-HDMI-001-7520A-A).
This document should be read in conjunction with the Harrier HDMI interface board datasheet and
other documents available on
(see Harrier HDMI Camera Interface Board -
Downloads section):
https://www.activesilicon.com/products/harrier-hdmi-camera-interface-board/
Figure 1. Harrier HDMI Camera Interface
Board mounted on a camera.
Figure 2. Reverse side of Harrier HDMI
Camera Interface Board.
Figure 3. Interface board block diagram showing position of connectors and DIP switches
The Harrier HDMI Camera Interface Board can also be supplied in USB/HDMI or USB-only variants.
A 3G-SDI/HD-SDI camera interface board is also available. For more details contact Active Silicon.
