Active Silicon AS-CAM-40LHD-A, Техническое справочное руководство

Страница: 26 / 61

            
Harrier series camera
.
May 2021 www.activesilicon.com Page 26 of 61
-
HLC (High Light Compensation) mode:
When extremely bright light is projected to the camera masking is used on the portion
to prevent partial saturation on the monitor
⚫
Day&Night (ICR) mode
An infrared (IR-cut) filter can be disengaged from the image path for increased
sensitivity in low light environment. The ICR will automatically engage depending on the
ambient light, allowing the camera to be effective in day/night environments.
-
Auto Mode:
Automatically switches the settings needed for attaching or removing the IR Cut Filter.
With a set level of darkness, the IR Cut Filter is automatically disabled. With a level of
brightness, the IR Cut Filter is automatically enabled.
-
Ext-In Mode:
Switches to Day mode when the input from D&N-IN Port is High and switches to Night
mode when it is low.
4. White Balance
⚫
Auto mode:
This mode computes the white balance value output using color information from the
entire screen. It outputs the proper value using the color temperature.
⚫
One push mode:
This is a fixed white balance mode that may be automatically readjusted only at the
request of the user (One-push Trigger)
⚫
Manual mode:
Manual control of R and B gain.
⚫
Indoor mode:
3700K base mode
⚫
Outdoor mode:
5100K base mode
⚫
Auto-Ext mode:
This mode operating on a wider range of color temperatures than Auto mode.