UG110
Rev 2.0, 23-Jul-2018
Innovative Power
TM
ActiveSwitcher
TM
is a trademark of Active-Semi.
19
Button Descriptions
Read:
Clicking on this button reads the ACT2861 registers and displays them in the GUI. Note that this reads
all registers. Active-Semi recommends reading registers each time the ACT2861 powers-up to acquire the initial
register settings. Active-semi also recommends reading registers after making changes to them. Immediately
reading the registers after a write confirms the changes were properly stored.
Read Button
Write:
Clicking on this button writes the GUI settings to the ACT2861’s registers. All registers are written,
regardless of whether or not they were changed.
Write Button
Dongle Connection Status:
The GUI also contains a dongle connection status that indicates Active-Semi’s
USB-TO-I2C dongle is connected to the USB port. The figure below shows the two possible indication status
graphics.
Dongle connected
Dongle Disconnected
