Questions? Call 866.621.4933 or visit www.activecaremed.com.
6. BATTERY & CHARGER
CHARGING THE BATTERY
Be sure to follow the procedures below accordingly.
1.
Turn the scooter key switch to “OFF”.
2.
Open the charging socket cap on the scooter’s cover then
connect the charger’s plug to the charging socket.
3.
Plug the power cable into your power outlet.
4.
The charger will now be on.
5.
The charger’s LED light will be orange at the beginning of a
charge. The charging duration is at least 6-8 hours but can
take as long as 10 hours, based on the status of the battery
and environmental temperature.
6.
The orange LED will turn to green when the charging is
complete.
7.
Disconnect the cord and remove the round plug from the
charge socket.
Suggestion
1.
Do not disconnect the charger cord if the charging is not
complete. The battery life will be shortened if the battery is
repeatedly used without being fully charged. Therefore, be sure to
charge the battery fully every time.
2.
Continue to charge until the green LED light is on. NEVER stop
charging before it is complete.
3.
While finishing charging, the electric power will still slowly
discharge if the cord is not disconnected.
4.
Your scooter should be charged at least every month to keep the
battery at full status, even when not being used.
5.
Charging time will be affected by the ambient temperature so it
takes longer in the wintertime.
Warning!
1.
Keep away from flammable objects while charging, as it may lead
to fire or explosion of the batteries.
2.
As the battery may produce hydrogen, do not smoke while
charging. Always charge your battery in a well-ventilated space.
3.
Never connect or disconnect the plug or cord with wet hands while
charging. Do not connect or disconnect the plug or cord when
they are wet, this may lead to an electric shock.
Prowler Owner’s Manual
13
Содержание Prowler 3410
Страница 1: ......
