Active Care Medical Prowler 3410, Руководство пользователя

Страница: 10 / 27

Questions? Call 866.621.4933 or visit www.activecaremed.com.
The sleep function will turn off the controller power, so the battery gauge will still
be bright until you turn off the power switch. When the scooter is in sleep status,
you must turn the power switch off and then on again to wake up it.
SPEED DIAL
The driving speed of the scooter is set via the speed control knob located on the
control panel. When the knob is turned to a position, the scooter will drive only at
the speed indicated by the knob. The scooter will travel faster the farther the knob
is turned clockwise. To reduce the scooter’s travel speed, turn the knob back
counterclockwise.
HEADLIGHT/TAILLIGHT BUTTON
The headlight button is an independent switch. So, if you drive your scooter with
the headlight on, remember to turn off the headlight at the same time you turn off
the power switch to avoid draining the battery.
FORWARD, REVERSE AND BRAKING
ƒ
Pull the speed control lever on the right hand side toward you and the
scooter will move forward.
ƒ
Pull the speed control lever on the left hand side toward you and the scooter
will move backward.
ƒ
The horn will beep when the scooter is in reverse.
ƒ
Release the speed control lever freely while in either forward or reverse
direction, the electromagnetic brake in the motor will activate, the scooter
stops.
ƒ
The scooter also has a hand brake. Pull the hand brake lever toward you and
the scooter will stop immediately.
SIGNAL LIGHT SWITCH
The light will flash and the horn will make a beeping sound when you press the left
or right signal lamp button.
Left signal light button
Right signal light button
Pressing the button again will turn the signal light off.
HORN BUTTON
The warning horn will be activated when you push the button, release the button
and the horn will stop.
Prowler Owner’s Manual 9