Active Care Medical Pilot 2310, Руководство пользователя

Страница: 25 / 29

Questions? Call 866.621.4933 or visit www.activecaremed.com.
Pilot Owner’s Manual 24
The diagnostic flash codes for your scooter are designed to help you perform basic
troubleshooting quickly and easily. A diagnostic flash code flashes from the Status
LED in the event one of the conditions listed below develops.
Table 2: Scooter Controller Internal Diagnostics
Flash
code
Possible Cause Solution
1 The battery needs charging.
The battery voltage has
dropped below 23.3 volts in
neutral. Recharge batteries.
2 Battery voltage is too low.
The battery has dropped
past 16.5 volts and is not
sufficient to allow safe
driving. Check the battery
condition and the
connections.
3 Battery voltage too high
The battery has exceeded 32
volts. Check the battery
condition and the
connections.
4 Current limit time out
The motor current has
reached too high a value.
Check the condition of the
motor and loom. Contact
your Service Agent.
5 Park brake fault Check park brake conditions.
6 Speed control out of neutral
Return speed pod to neutral
and rest system. Readjust
the speed lever to neutral if
necessary. Contact your
Service Agent.
7 Speed control fault
Check speed pod wiring for
open or short circuits. Check
speed pot set-up. Contact
your Service Agent.
8 Motor fault Contact your Service Agent.
9 Internal (controller) fault Contact your Service Agent.