- 46 -
Event Configuration >> Schedule Trigger
You can separately configure the schedule for trigger function of the
camera by Email, FTP, or Network Storage. Select the Enable option on
each item, and then select a Schedule Profile from the pull-down list and
set the Interval time.
NOTE
If the setting value of the Network Storage Recording Time Per
Event option in General Setting is longer than the Interval time
in Network Storage Schedule, the recorded file will be a
continuous video clip.
For example, if you set the Network Storage Recording Time
Per Event as 10 seconds and the Interval as 5 seconds, recorded
file becomes a non-stop video clip because the camera will
record a 10-second video clip every 5 seconds.
