Art. Nr.: 12200R Cabrio
Page 19 of 22
EN
Do not carry out any work on the gas-technical parts yourself, but leave
this to a specialist. In most cases, you can fix minor faults with the help of
the following table. In case of gas leakage, do not use the device and check
and repair it before using it again.
Malfunction
Examine
Repair
Gas smell emerges
Check the sealing ring on the bottle
Search all gas-carrying parts with leak de-
tection spray or soapy water.
If defective, replace.
Tighten loose connections.
Device does not ignite
immediately
Make sure that the gas valves are open.
Check that there are no sparks when the
appliance is lit.
Make sure that the burners are clean.
Check that the gas bottle is still full.
Open valve
Clean area around ignition ele-
ment
Clean
Have gas cylinder refilled.
Burner does not ignite
Is there still gas in the bottle?
Is the cylinder valve open?
Regulator defective?
Is the igniter connected correctly?
Injection nozzle or valve tubes clogged?
Is there a spark from the igniter?
Let the bottle fill up.
Turn on the valve.
Clean burner tubes
Install the igniter correctly accord-
ing to the instructions.
Check cable for defects
Noises at the pressure
regulator
Check whether the air vents on the pres-
sure regulator are blocked or clogged.
Clean the opening and
wait 5
minutes
before restarting the
unit.
Flame flashback.
In rare cases, flames can
flash back into the burner
tube.
This results in a bubbling sound, or a small
explosion.
Immediately close the gas supply
on the gas bottle. Wait one minute
and restart the grill. If the phe-
nomenon occurs again, the burn-
ers must be cleaned.
Flame ring unequal
Burner/burner tube defective or clogged?
Replace or clean burner
Flaring up of flames or
sparks
Fat drain system clogged?
excessive fat in the meat
too high grill temperature
Clean the grill
cut fat from meat beforehand
Reduce temperature.
Heating power insufficient
Injector or Venturi tubes clogged
Carefully clean both
The device takes a very
long time to heat up
When it is cold outside, the unit takes
longer to heat up. It takes about 10-15
minutes for the appliance to heat up to its
maximum power.
The gas supply is insufficient because
there is not enough gas in the gas bottle.
Have gas cylinder refilled or re-
placed.
Check if the gas hose is blocked
or clogged.
Flames behind the control
knob, front panel or at con-
nection points
Valve defective or connections leaking?
Immediately close the gas supply
to the gas cylinder. Carry out the
leak test as described.
Technical Service
Hotline: 09287 / 9560970
Mo - Fr von 8 - 17.00
ACTIVA Grillküche GmbH
– Wilhelmstraße 10 - 95100 Selb / Bayern
Содержание 12200R Cabrio
